This course is free and editable. Yours to re-brand and tailor to your needs!
Forklift Operation Safety Free
Learn how to safely operate a forklift from pre-operative checks to maneuvering and load handling.
From the author:“The 'Forklift Operation Safety' course builds on how to safely operate a forklift from pre-operative checks to maneuvering and load handling. This 3-part course covers all of the essentials for appropriate and safe use of forklifts, including pre-operation, travelling and maneuvering, and load handling. If you are using forklifts in your role or are interested in understanding the best practices, look no further than this course.”Forklift Operation Safety Lessons
Click through the microlessons below to preview this course. Each lesson is designed to deliver engaging and effective learning to your team in only minutes.
- Pre-Operation
- Traveling & Maneuvering
- Load Handling
Like what you see?
This course is free and completely editable. Update the text, add your own slides or re-brand the entire course — with our no-code authoring tool, the sky’s the limit!
Follow the interactions on each screen or click the arrows to navigate between lesson slides.
What you will learn
- Pre-Operation
- Load Handling
- Travelling & Manoeuvring
Forklift Operation Safety course excerpts
Pre-Operation
Go over the visual and operative checks to make sure your forklift is safe for use.Pre-Operation
Forklifts should be examined once a day at least to make sure they are operatable.
If there is any sign that a forklift is non-operable, unsafe or defective it should be removed and not be used. Following that, this should be reported immediately to a supervisor.
Visual Pre-Check Make sure the engine is off and the key is not in the forklift. Check the water, oil and hydraulic fluid. Look for any cracks or leaks. Any defect of flurid including faulty hoses and mast changes should be reported. You should NOT touch inside the mast for any reason. When checking tension, use an object such as a stick. Check for leaks and cuts on the tires. Look for the top clip, retaining pin and heel of the forks. Check the finger guards as well as backrest extension. All decals, nameplates, warning signs, operator manual and plates should be legible and in their respective places. Finally, look for grease and debris, then make sure the seat belt is working properly.
Operational Check FIrst, make sure the engine is running.
Check the brakes, steering, and accelerator.
Next check the drive by going forward and reversing, then the tilt by tilting forwards and backwards. Check the hoist as well as the lowering control, and the attachment control even if you are not attaching anything. Test the horn, lights, hour meter and back-up alarm. Listen for any unusual noises and report if you hear any.
What operational problems are possible with a forklift? Select all that apply
Traveling & Maneuvering
Learn how to safely drive, turn and park your forklift.Driving the Forklift
Operating a forklift, you must ALWAYS follow the safety rules, maintain a clear visual of your environment and stay at a safe speed.
When Mounting the Forklift Make sure your hands are dry and your shoes are free of grease when entering the forklift. This is to prevent slippage. Use the handhold to let yourself in with and maintain a tight grip. Grabbing the steering wheel is not advised because it could move and throw you off balance. Watch your step! It's easy to fall when mounting and dismounting from vehicle. When dismounting, DO NOT JUMP! Your footwear should have treads that grip to prevent any falls.
Steering & Turning
As stated before, slow down when you are approaching turns and remain cautious, especially in narrow spaces. You will have a rear-swing when you turn, so plan your route ahead of time and anticipate when you will have to turn.
There are two instances you should NEVER turn: When the fork is elevated. When you're on a grade (to avoid tipover).
Tipovers If you happen to tip over, still do not jump, stay where you are. While you are tipping: Grip the steering wheel. Brace yourself with your feet. Lean away from where you're going to hit the ground, and then lean forward.
Load Handling
Explore the best practices for distributing loads and how to safely travel with them.Load Handling
Handling Loads Safely Secure your load so it's stable. If the load is damaged, using wrapping or other means to keep it together. Center your load and distribute the heaviest parts closest to the front wheels. Know the weight limit of the particular forklift you're using and do not go above that. This can cause tipover.
Lifting the Load As stated before, make sure there's enough head room when lifting loads. Also watch out for hanging lights, pipes or sprinkler systems.
Check for any obstructions when loading, then slowly put the lift control in the neutral position before moving again.
Lowering the Load When lowering your load, come to a complete stop. Before lowering, put the mast into its original position. Do not lower the load below 6 inches (or 15 - 20 cm).
Forklift Operation Safety Course Author
EdAppEdApp is an award winning, mobile first microlearning platform with integrated authoring and delivery. EdApp contributes training courses that have been created by the in house instructional design specialists.Users Also Learned
Very informative
Informative and interactive very well done
Needed
In all my honesty im looking to be recertified again .its been a while since ive driven a sit down or stand up forklift actuall probably 2016 last time or 2017 something like that of that nature .
EdApp is easy to use and free for you and your team. No credit card required.
or book a demo with us today!
